5 3 Rocker Arm Torque Sequence. 1995 Honda civic rocker arm torque specs Cylinder Head Torque specs, timing chain installation, manifolds torque specs, engine assembly Intake Manifold Bolts (in sequence) 89 lb in: Knock Sensors: 15 lb ft: Oil Pan M8 Bolts (Oil Pan-to-Engine Block and Oil Pan-to-Front Cover) 18 lb ft: Oil Pan M6 Bolts (Oil Pan-to-Rear Cover) 106 lb in: Valve Rocker Arm Bolts: 22 lb ft: Valve Rocker Arm Cover Bolts: 106 lb in: Water Inlet Housing Bolts: 11 lb ft: Water Pump Bolts (First Pass.
LS Rocker Arm Torque Specs & Sequence from vehiclefreak.com
Although the 4.8 and 5.3 are called Vortec, they still share the same geometry as LS-Series engines Tighten in Sequence: Always torque the rocker arms in the specified sequence to ensure even.
LS Rocker Arm Torque Specs & Sequence
Intake Manifold Bolts (in sequence) 89 lb in: Knock Sensors: 15 lb ft: Oil Pan M8 Bolts (Oil Pan-to-Engine Block and Oil Pan-to-Front Cover) 18 lb ft: Oil Pan M6 Bolts (Oil Pan-to-Rear Cover) 106 lb in: Valve Rocker Arm Bolts: 22 lb ft: Valve Rocker Arm Cover Bolts: 106 lb in: Water Inlet Housing Bolts: 11 lb ft: Water Pump Bolts (First Pass. Although the 4.8 and 5.3 are called Vortec, they still share the same geometry as LS-Series engines Intake Manifold Bolts (in sequence) 89 lb in: Knock Sensors: 15 lb ft: Oil Pan M8 Bolts (Oil Pan-to-Engine Block and Oil Pan-to-Front Cover) 18 lb ft: Oil Pan M6 Bolts (Oil Pan-to-Rear Cover) 106 lb in: Valve Rocker Arm Bolts: 22 lb ft: Valve Rocker Arm Cover Bolts: 106 lb in: Water Inlet Housing Bolts: 11 lb ft: Water Pump Bolts (First Pass.
Rocker Arms. It is also recommended to use a thread locker such as Loctite on the threads of both sides of the rocker arms after they have been. Torque should be applied in two steps, first at 15 ft-lb and then at 65/55 ft-lb to ensure a proper seal
LS Rocker Arm Torque Specs & Sequence. Tighten exhaust valve rocker arm retaining bolts 1, 2, 7, and 8 to 30 Nm (22 lb ft) #automobile #lsswap #tipsandtricks #howto #squarebody In this detailed guide, we show you how to properly install LS rocker arms using the correct torque seq.